New and Valid for 100% Passing Ensure NetApp NS0-507 Dumps from PassLeader: https://www.passleader.com/ns0-507.html (130 Q&As), PassLeader offer both NS0-507 VCE Dumps and NS0-507 PDF Dumps for Preparing for the NetApp NS0-507 Exam, 100% Valid and 100% Passing Guarantee.
More, you can download the latest PassLeader NS0-507 Exam Dumps Online for FREE: https://drive.google.com/open?id=0B-ob6L_QjGLpSmd3OXVGOE5FODQ
QUESTION 1
You are performing storage failover testing on a 2-node FAS2650 cluster named Cl01. A Windows Server 2012 R2 host has 10 FC LUNs mapped from the cluster. After Cl01-01 takes over Cl01-02, the windows host loses access to all of its LUNs. Which statement describes what is happening in this scenario?
A. Switch zoning does not exist between the windows initiators and the Cl01-02 targets
B. NPIV is not enabled on the cluster
C. Switch zoning does not exist between the windows initiators and the Cl01-01
D. NPIV is not enabled on the FC switches
Answer: C
QUESTION 2
What are three considerations when creating a physical reference diagram of an FC SAN? (Choose three.)
A. Hardware is compatible
B. FC SAN zoning is available
C. Power connectivity is available
D. FC port connectivity is available
E. FC switches are available
Answer: BDE
QUESTION 3
A LUN copy has been created by using the lun copy command. To allow the copy to be seen on the same host, what would you do?
A. Create a new portset.
B. Map the LUN to the same igroup.
C. Change the serial number of the copied LUN.
D. Configure SLM on the new node.
Answer: B
QUESTION 4
A customer has 1 TB volume with space guarantee set to volume. Two 100 GBs LUNs are created in the volume with LUN reservation enabled and no snapshot copies exist. In this scenario, how much space will be shown as used in the volume?
A. 0 GB
B. 200 GB
C. 400 GB
D. 100 GB
Answer: B
QUESTION 5
Referring to the exhibit, which zones use only World Wide Port Name Zoning?
A. Bond
B. Jeff
C. Jake
D. Zeus
Answer: B
Explanation:
Worldwide port name zoning refers to zoning that uses the world wide port names of devices that are being zoned, and not the switch port name as the others are doing.
– Bawn is using switch port zoning
– Bond is using a combination of the two
– Brain is using switchport
– Jake is using switchport
– Jeff is using WWPN zoning
– Jones and Zeus are using switch port
QUESTION 6
A new server has been installed in your environment, but it is unable to see its NetApp boot LUN. You have narrowed the problem down to the zoning on your Cisco switch which has the following configuration:
zone name z_NetAppvsan 400
memberpwwn 20:00:00:25:B5:C0:ff:ee
memberpwwn 50:0a:09:84:8d:7c:51:D5
zoneset name zs_NetAppvsan 400
memberz_NetApp
zoneset activate name zs_NetAppvsan 400
What is the problem with your zoning configuration?
A. The member does not reference the VSAN.
B. The zone and zoneset names do not match.
C. The zoneset was improperly activated.
D. The PWWN for your NetApp LIF is incorrect.
Answer: D
QUESTION 7
Referring to the volume v_iscsi_exch01 shown in the exhibit, which two LUN combinations can you create? (Choose two.)
A. Five LUNS, each LUN 3GB in size, with the LUN option space-reserve set to enabled
B. Three LUNS, each LUN 5GB in size, with the LUN option space-reserve set to enabled
C. Two LUNS, each LUN 5GB in size, with the LUN option space-reserve set to disabled
D. Four LUNS, each LUN 1GB in size, with the LUN option space-reserve set to enabled
Answer: CD
QUESTION 8
To provide host connectivity for both SAN and NAS protocols, which combination is valid?
A. UTA2 configured as FC connected to an FCoE-enabled switch with CNAs in the host
B. UTA2 configured as FCoE connected to a FCoE-enabled switch with FC HBAs in the host
C. UTA2 configured as 10Gb Ethernet connected to an Ethernet switch with CNAs in the host
D. UTA2 connected to an FCoE-enabled switch with CNAs in the host
Answer: D
QUESTION 9
Referring to the exhibit, you see an FC SAN configuration that uses multiple fabrics and the best practice Implementation. How many paths per LUN do you expect the host to see if the cable 0c connecting controller 2 to fabric 1 is pulled out for connectivity redundancy testing?
A. 6
B. 14
C. 12
D. 7
Answer: D
QUESTION 10
Which command on the storage system allows you to display statistics on the performance of system resource such as CPU, NVRAM, network interfaces, and disks?
A. netstat
B. netdiag
C. pktt
D. sysstat
Answer: D
Trying the PassLeader NS0-507 Dumps in VCE and PDF for Your First Attempt and 100% Passing: https://www.passleader.com/ns0-507.html (130 Q&As, VCE and PDF)
More, download new PassLeader NS0-507 Exam Dumps for FREE: https://drive.google.com/open?id=0B-ob6L_QjGLpSmd3OXVGOE5FODQ