[20-April-2020 Update] NetApp NCIE – SAN, ONTAP Exam NS0-509 VCE Dumps and NS0-509 PDF Dumps from PassLeader

New and Valid for 100% Passing Ensure NetApp NCIE – SAN, ONTAP NS0-509 Dumps from PassLeader: https://www.passleader.com/ns0-509.html (150 Q&As — 180 Q&As), PassLeader offer both NS0-509 VCE Dumps and NS0-509 PDF Dumps for Preparing for the NetApp NCIE – SAN, ONTAP NS0-509 Exam, 100% Valid and 100% Passing Guarantee.

More, you can download the latest PassLeader NS0-509 Exam Dumps Online for FREE: https://drive.google.com/open?id=18oPeIxUJkSYaUzRnOflg_HHgZz1OquJF

NEW QUESTION 131
You have a 4-node cluster with an AFF A300 HA pair and a FAS8200 HA pair. You plan on using the default storage efficiency settings. With inline data compaction, you estimate that you can save 6% of storage space. AFF A300 volumes that use under 5000 IOPS are moved to a FAS8200 using the volume move command. In this scenario, what happens to the data after the volume is moved? (Choose two.)

A. The new written data is not compacted.
B. The existing data is compacted.
C. The new written data is compacted.
D. The existing data is not compacted.

Answer: A

NEW QUESTION 132
Which command displays the statistics for Ethernet network interfaces?

A. ifconfig
B. ifstat
C. sysconfig
D. sysstat

Answer: B

NEW QUESTION 133
A snapshot is a frozen, read-only image of the entire Data ONTAP active file system that reflects the state of the ____ at the time the snapshot was created.

A. qtrees
B. volume
C. directory
D. storage system

Answer: B

NEW QUESTION 134
Data ONTAP uses inodes in an active file system to reference ____.

A. qtrees
B. disk blocks
C. file segments
D. snapshot copies

Answer: B

NEW QUESTION 135
Which command or procedure would you use to undo a volume SnapRestore operation?

A. snap restore -r vol
B. snap revert -s vol
C. snap restore undo vol
D. you cannot undo a SnapRestore operation at the volume level

Answer: D

NEW QUESTION 136
You have a host with multiple initiator ports attaching to a single SAN LIF. With this setup, which action is required?

A. You must use host multipathing software.
B. You must use an individual SAN LIF for each initiator port.
C. You must use a portset.
D. You must use a SAN LIF failover group.

Answer: A

NEW QUESTION 137
In a new SAN installation, which three components do you verify in the IMT for a supported solution? (Choose three.)

A. HBA driver
B. host memory
C. host OS patch level or Service Pack
D. application patch level
E. switch firmware

Answer: ACE

NEW QUESTION 138
You have a switch called NK5-A configured with an NP_Port. Which switch feature on NK5-A uses NP_Ports to allow for fabric expansion of new FC switches without having to designate additional domain IDs?

A. F-port channel trunking
B. FCIP
C. NPIV
D. NPV

Answer: D

NEW QUESTION 139
Which resource identifies the number of UTA2 ports available on a FAS8020 controller?

A. Hardware Universe
B. Interoperability Matrix Tool
C. Universal SAS and ACP Cabling Guide
D. Config Advisor

Answer: A

NEW QUESTION 140
Which command on the storage system allows you to display statistics on the performance of system resource such as CPU, NVRAM, network interfaces, and disks?

A. netstat
B. netdiag
C. pktt
D. sysstat

Answer: D

NEW QUESTION 141
Which two commands on the storage system allow you to gather detailed statistics about network interfaces, including basic information about network connections? (Choose two.)

A. ifstat -a
B. netdiag -n
C. netstat -i
D. sysstat -i

Answer: AC

NEW QUESTION 142
Which are three characteristics of an iSCSI or FCP SAN implementation? (Choose three.)

A. A LUN can be converted into a VLD.
B. LUNs can be accessed using the FCP protocol.
C. LUNs can be accessed using the iSCSI protocol.
D. Block services are associated with an iSCSI or FCP SAN environment.

Answer: BCD

NEW QUESTION 143
Which three attributes would you specify when creating a LUN? (Choose three.)

A. The host operating system of the system attached to LUN.
B. The version of Data ONTAP.
C. The size of the LUN.
D. The path to the LUN.

Answer: ACD

NEW QUESTION 144
If you believe you create FC SAN performance problem, which NatApp utility would gather both your Solaris host and storage system data for analysis?

A. sio_ntap.exe
B. prestart
C. poststat
D. perfstat

Answer: D

NEW QUESTION 145
Which command can you use to determine the state of the FC ports for a Brocade switch?

A. switchreveal
B. switchview
C. switchshow
D. switchstatus
E. switchstate

Answer: C

NEW QUESTION 146
……


Trying the PassLeader NS0-509 Dumps in VCE and PDF for Your First Attempt and 100% Passing: https://www.passleader.com/ns0-509.html (150 Q&As — 180 Q&As, VCE and PDF)

More, download new PassLeader NS0-509 Exam Dumps for FREE: https://drive.google.com/open?id=18oPeIxUJkSYaUzRnOflg_HHgZz1OquJF