New and Valid for 100% Passing Ensure NetApp Cisco and NetApp FlexPod NS0-176 Dumps from PassLeader: https://www.passleader.com/ns0-176.html (141 Q&As), PassLeader offer both NS0-176 VCE Dumps and NS0-176 PDF Dumps for Preparing for the NetApp Cisco and NetApp FlexPod NS0-176 Exam, 100% Valid and 100% Passing Guarantee.
More, you can download the latest PassLeader NS0-176 Exam Dumps Online for FREE: https://drive.google.com/drive/folders/1hsTrfw2UhmhEWhIVUsG3flKSQdwc8zpu
NEW QUESTION 121
You are asked to configure the computer resources in a FlexPod solution to ensure that jumbo frames are configured end-to-end. Which three actions must you perform to accomplish this task? (Choose three.)
A. Set the MTU size to 1500 on the vNIC template.
B. Enable jumbo frames on all of the switches between the initiator and the iSCI target.
C. Configure a UCS QoS System Class with the jumbo frames.
D. Configure jumbo frames on the switch VLANs.
E. Enable jumbo frames on the operating system adapter.
Answer: BCE
NEW QUESTION 122
You are creating the Gold Master Boot LUN for Windows 2012 R2 Hyper-V hosts. In this scenario, which three steps are needed to ensure that all Hyper-V hosts will work as desired? (Choose three.)
A. Disassociate the service profile before cloning the LUN.
B. Map all Hyper-V hosts to the same Gold Master Boot LUN for consistency.
C. Use Sysprep to prepare the operating system for duplication.
D. Use a temporary service profile to install and configure the OS.
E. Enter in the Windows license key to activate Windows before cloning the LUN.
Answer: BDE
NEW QUESTION 123
Which two operating modes are available with the Nexus 9000 Series switches? (Choose two.)
A. Cisco NX-OS
B. Cisco ACI
C. Cisco IOS
D. Cisco IOS EX
Answer: AB
NEW QUESTION 124
Which four items are required in order to create a Gold Master Boot LUN to automate the provisioning of Hyper-V hosts using the built-in LUN cloning capabilities of NetApp storage? (Choose four.)
A. Create additional virtual fibre channel (vfc) interfaces for the Nexus 5500.
B. Creation of a LUN for the Gold Master Boot LUN.
C. Configuration of the Server OS and hotfix installation.
D. Create a new interface group on the NetApp Cluster.
E. SysPrep of the server operating system.
F. Creation of a service profile and zoning for Gold Master Boot LUN.
Answer: BCEF
NEW QUESTION 125
Which three are types of Storage Virtual Machines? (Choose three.)
A. data
B. cluster
C. flex
D. intercluster
E. node
F. vFiler
Answer: ABE
NEW QUESTION 126
You are installing two NetApp FAS8080 EX controllers. Which two ports would you use for HA connectivity? (Choose two.)
A. ib0b
B. ib0a
C. eof
D. e0e
Answer: AB
NEW QUESTION 127
When creating local user, which two are valid user names? (Choose two)
A. daemon
B. somebody
C. root
D. 1greatuser
E. 12345
F. best_user
Answer: BF
NEW QUESTION 128
You are installing a FlexPod Express solution with a NetApp AFF A250 at a customer’s remote site. In this scenario, which two devices are required to provide an NFS v3 datastore? (Choose two.)
A. Cisco UCS 6324 Fabric Interconnects
B. Cisco Nexus 3000 Switches
C. NetApp BES-53248 Switches
D. Cisco UCS 6454 Fabric Interconnects
Answer: AB
NEW QUESTION 129
What are two valid cluster interconnect switches? (Choose two.)
A. NetApp CN610
B. Cisco Nexus 5596
C. Cisco Nexus 9504
D. Cisco Nexus 7004
Answer: AB
NEW QUESTION 130
A customer asks you to configure QoS on a Cisco Nexus 7000 Series switch within a FlexPod solution. Which three steps are required to accomplish this task? (Choose three.)
A. Attach policies to logical or physical interfaces and VLANs.
B. Define traffic classes.
C. Associate policies and actions with each traffic class.
D. Attach policies to logical or physical interfaces and VSANs.
E. Perform a shut/no shut on the affected interfaces.
Answer: BCD
NEW QUESTION 131
Which two statements about HA pairs in a NetApp cluster are true? (Choose two.)
A. In the event of a storage failover, the surviving node provides read/write access to the partner’s disks until the failed node becomes available again.
B. Non-disruptive aggregate relocation can be performed between HA pairs without a takeover and giveback.
C. HA pairs in the same chassis are not connected to each other through an HA interconnect.
D. In the event of a storage failover, the surviving node always takes over the partner’s data LIFs.
Answer: AD
NEW QUESTION 132
Which three are characteristics of a NAS data LIF? (Choose three.)
A. It can be associated with a Fibre Channel port.
B. It can be associated with a WWPN.
C. It can be associated with an Ethernet port or VLAN interface.
D. It can be associated with an interface group (ifgrp).
E. It can be associated with an IP address.
F. It is associated with the administrative Vserver.
G. It is associated with the management LIF.
Answer: CDE
NEW QUESTION 133
You want to run the FlexPod execution profile in NetApp Config Advisor. Which three login credentials are required to perform this task? (Choose three.)
A. NetApp cluster.
B. NetApp support login.
C. UCS Manager.
D. ESXi server.
E. Nexus switches.
Answer: ACE
NEW QUESTION 134
In which two locations is the VSAN ID configured in a FlexPod solution? (Choose two.)
A. Storage Virtual Machine.
B. UCS Manager.
C. Nexus switches.
D. Hypervisor adapter.
Answer: BC
NEW QUESTION 135
Which two are correct about VSAN configuration within UCS Manager? (Choose two.)
A. VSAN ID and FCoE VLAN ID have to match.
B. VSAN can be configured as fabric interconnect specific.
C. We can delete VSAN 1.
D. VSAN IDs 3840-4079 are not available regardless of the Fabric Interconnect mode.
E. VSAN can be configured as a global parameter.
F. In addition to SAN tab, VSANs can be configured under UCSM Server tab as well.
Answer: BC
NEW QUESTION 136
For a ‘boot from SAN’ configuration, which two features must be enabled? (Choose two.)
A. FCOE
B. UDLD
C. NPIV
D. FC
E. FCSP
F. VPC
Answer: AC
NEW QUESTION 137
A disaster occurred and both Cisco UCS Fabric Interconnects must be replaced. You must restore the system from a “full state” backup. Which two steps will accomplish this task? (Choose two.)
A. Remove the current firmware from the new Fabric Interconnects.
B. Restore the “full state” backup through the primary Fabric Interconnect’s initial system setup wizard.
C. Restore the “full state” backup using the UCS Manager “import configuration” wizard.
D. Upgrade the new Fabric Interconnects to the same version of firmware as the previous Fabric Interconnects.
Answer: CD
NEW QUESTION 138
An administrator is configuring a Flexpod Datacenter solution. The UCS service profiles will use FCoE connectivity to the NetApp cluster. Which pool is needed to configure the vHBA templates?
A. WWPN pool
B. MAC pool
C. IQN pool
D. WWNN pool
Answer: A
NEW QUESTION 139
You want to verify that you have configured Multipath HA correctly for all of the attached disk shelves on a NetApp cluster. Which two commands would you execute from the cluster CLI prompt to accomplish this task? (Choose two.)
A. sysconfig -a
B. node run -node * -command disk show
C. node run -node * storage show disk -p
D. node run -node * sysconfig -a
Answer: AC
NEW QUESTION 140
The storage administrator created an export policy for a volume on a NetApp cluster. The export policy contains a single export rule with the parameters shown below:
– protocol nfs – rorule any
– clientmatch 10.1.16.0/255.255.255.0 – rwrule any
Two hosts attempt to access the volume using the NFS protocol shown below:
– HostA with IP address 10.1.17.37 sends an access request using the NFSv3 protocol
– HostB with IP address 10.1.16.24 sends an access request using the NFSv4 protocol
Which statement about this scenario is true?
A. HostA’s access to the volume will be blocked by the protocol parameter; HostB will be granted RO/RW access to the volume.
B. HostA’s access to the volume will be blocked by the clientmatch parameter; HostB’s access to the volume will be blocked by the protocol parameter.
C. HostA will be granted RO/RW access to the volume; HostB’s access to the volume will be blocked by the protocol parameter.
D. HostA’s access to the volume will be blocked by the clientmatch parameter; HostB will be granted RO/RW access to the volume.
Answer: C
NEW QUESTION 141
……
Trying the PassLeader NS0-176 Dumps in VCE and PDF for Your First Attempt and 100% Passing: https://www.passleader.com/ns0-176.html (141 Q&As, VCE and PDF)
More, download new PassLeader NS0-176 Exam Dumps for FREE: https://drive.google.com/drive/folders/1hsTrfw2UhmhEWhIVUsG3flKSQdwc8zpu