New and Valid for 100% Passing Ensure NetApp Cisco and NetApp FlexPod NS0-176 Dumps from PassLeader: https://www.passleader.com/ns0-176.html (60 Q&As –> 141 Q&As), PassLeader offer both NS0-176 VCE Dumps and NS0-176 PDF Dumps for Preparing for the NetApp Cisco and NetApp FlexPod NS0-176 Exam, 100% Valid and 100% Passing Guarantee.
More, you can download the latest PassLeader NS0-176 Exam Dumps Online for FREE: https://drive.google.com/drive/folders/1hsTrfw2UhmhEWhIVUsG3flKSQdwc8zpu
NEW QUESTION 1
You are asked to install the Virtual Supervisor Module (VSM) software on a Nexus 1000v switch. Which two sources would you use to install this software? (Choose two.)
A. OVA file
B. PXE boot
C. ISO image
D. VSC plug-in
Answer: BC
NEW QUESTION 2
A customer wants to reuse existing networking equipment that was pulled from another data center for a new FlexPod Datacenter solution. They want to know if their switch models are supported. In this scenario, which two switch models will accomplish this task? (Choose two.)
A. Cisco Catalyst 6504
B. Cisco Catalyst 9300-48P
C. Cisco Nexus 9396PX
D. Cisco MDS 9250i
Answer: CD
NEW QUESTION 3
Which two technologies must be deployed for a Cisco Nexus 9000 ACI design? (Choose two.)
A. spine switch
B. VSM
C. APIC
D. LACP
Answer: AC
NEW QUESTION 4
Which feature allows Cisco Nexus 7000 Series switches to be virtualized at the device level?
A. PONG
B. VLAN
C. VRF
D. VDC
Answer: D
NEW QUESTION 5
An administrator has a FlexPod solution configured for Microsoft Hyper-V 2012 R2. The hypervisor will be using CIFS shares for Cluster Shared Volume (CSV) datastores. A storage virtual machine (SVM) is configured, and a CIFS share is created for use. When attempting to add the CSV datastore to the CIFS share, an error occurs and the datastore is not created. Which three steps should the administrator perform to solve the problem? (Choose three.)
A. Configure the “Enable Oplocks” setting on the CIFS share.
B. Configure the ~-smb3-enabled~ parameter on the SVM.
C. Configure the export policy with the Hyper-V host IP address.
D. Create multiple LIFs for CIFS Hyper-V traffic to enable ALUA.
E. Enable the “Continuous Availability” setting on the CIFS share.
Answer: ABC
NEW QUESTION 6
You have a FlexPod solution with Cisco 6296UP Fabric Interconnects. You currently have a direct-attached AFF8040 system using FCoE for storage connectivity. You would like to reconfigure the FlexPod so that the storage is connected through the upstream switches. Using UCS Manager, which two steps would you perform to accomplish this task? (Choose two.)
A. Using the Configure Unified Ports wizard, change the port types to Ethernet.
B. Using the Configure Unified Ports wizard, change the port types to FC.
C. Configure the FI ports with the FCoE Uplink role.
D. Configure the FI ports with the Uplink role.
Answer: BD
NEW QUESTION 7
Which three are true for UCS 2208XP? (Choose three.)
A. Works with FI 6120 and FI 6296.
B. Supports FCoE.
C. Supports native FC.
D. Has 32 10Gb ports to each half-width slot in the chassis.
E. Supports 4 port port-channel toward FI 6140.
F. Connects to both Fabric Interconnects for high availability.
Answer: ABD
NEW QUESTION 8
Your customer has the storage configuration for a FlexPod solution shown below:
– FAS8040 HA-pair.
– Disk stack one-4x DS4243 disk shelves (2TB SATA disk drives).
– Disk stack two- 2x DS 2246 disk shelves (1.2TB disk drives).
– There are no unused SAS ports on either controller.
– There are no expansion slots available on either controller.
The customer wants to attach a single DS2246 disk shelf with 800 GB SSD drives. In this scenario, what are two ways to connect the new shelf for optimal performance? (Choose two).
A. Cable the new shelf to the end of stack one.
B. Cable the new shelf to the end of stack two.
C. Cable a new stack for the SSD shelf.
D. Cable the new shelf to the beginning of stack two.
Answer: CD
NEW QUESTION 9
Which two are the expected outputs of network interface show? (Choose two.)
A. IP addresses of NAS and iSCSI logical interfaces.
B. iSCSI IQNs.
C. Namespace of SAN logical interfaces.
D. System WW node name.
E. WW port names of Fibre Channel and FCoE logical interfaces.
Answer: AE
NEW QUESTION 10
A customer uses Cisco Intersight and now wants to monitor their NetApp storage system with Intersight. In this scenario, which three actions must be completed to accomplish this task? (Choose three.)
A. Activate the API Gateway in Active IQ Unified Manager.
B. Get an Intersight Essentials tier license.
C. Activate the API Gateway in ONTAP System Manager.
D. Get an Intersight Advantage tier license.
E. Deploy Active IQ Unified Manager.
Answer: ADE
NEW QUESTION 11
Which three management tools would you use to configure the NetApp storage component in a FlexPod Datacenter solution? (Choose three.)
A. NetApp OnCommand Perfromance Manager
B. Cisco UCS Central
C. NetApp Virtual Storage Console (VSC) for VMware Sphere
D. Cisco UCS Director
E. NetApp OnCommand System Manager
Answer: BCE
NEW QUESTION 12
Your company has acquired a new NetApp EF600 storage array with a 25 Gbps HIC. In this scenario, which FlexPod-supported protocol should be used to connect to this array?
A. NFS
B. iSCSI
C. FC
D. SMB
Answer: B
NEW QUESTION 13
When configuring a FlexPod environment for iSCSI boot with Cisco UCS, which item should be preconfigured?
A. All zoning should be configured.
B. Zonesets should be created.
C. IQN and IP address of target.
D. WWPN Pools.
Answer: C
NEW QUESTION 14
Which two are true about Fabric Interconnect L1 and L2 ports in cluster mode? (Choose two.)
A. Fabric Interconnects connected via L1/L2 have to be the same model except during the upgrade.
B. Ports are primarily used for management traffic, but can be used for data traffic as well.
C. Fabric Interconnect ports L1 and L2 are 10 Gb links.
D. Ports can only run as a port channel.
E. Ports can only run as individual links.
F. Ports can run as a port channel or as individual links.
Answer: AD
NEW QUESTION 15
An administrator has a FlexPod solution using VMware vSphere 6.0. The ESXi hosts use iSCSI for storage connectivity, and all paths have been configured and connected between the NetApp cluster and the ESXi hosts.
Virtual Storage Console has been installed and ESXi host-recommended settings have been applied to all hosts. The active LUN path for one of the iSCSI datastores experiences a connectivity failure and the LUN switches to a new active path. In this scenario, which event would trigger the ESXi host to switch the active LUN path again?
A. The host processes 1,000 I/O operations.
B. The original LUN path comes back online.
C. The ESXi host scans for new VMFS datastores.
D. The NetApp LIF is reverted to its home port.
Answer: D
NEW QUESTION 16
Which three elements are included in a UCS service profile? (Choose three.)
A. firmware revisions
B. volume layout
C. switch configuration
D. server definition
E. identity information
Answer: ADE
NEW QUESTION 17
Which of the following tools is designed to inventory existing VMware vSphere, Linux, and Microsoft Windows Server versions in a customer environment?
A. Cisco UCS Sizer for Enterprise Applications
B. Cisco UCS Central
C. Microsoft Assessment and Planning (MAP) Toolkit
D. Cisco Resource Comparison Tool
Answer: C
NEW QUESTION 18
With Clustered Data ONTAP, which three protocols are supported for host boot in a UCS stateless computing environment in the FlexPod configuration? (Choose three.)
A. CIFS
B. FC
C. FCIP
D. FCoE
E. iFCP
F. iSCSI
G. NFS
Answer: BDF
NEW QUESTION 19
Which two are characteristics of a Fibre Channel SAN data LIF? (Choose two.)
A. It can be associated with a Fibre Channel port.
B. It can be associated with a WWPN.
C. It can be associated with an Ethernet port or VLAN interface.
D. It can be associated with an interface group (ifgrp).
E. It can be associated with an IP address.
F. It is associated with the administrative Vserver.
G. It is associated with the management LIF.
Answer: AB
NEW QUESTION 20
You are asked to verify your MPIO settings for your ONTAP FlexPod solution. You are using VMware ESXi 6 and FCP as the storage protocol. In this scenario, which MPIO setting would you use on the ESXi host?
A. fixed path
B. round robin
C. fixed path with array preference
D. most recently used
Answer: B
NEW QUESTION 21
……
Trying the PassLeader NS0-176 Dumps in VCE and PDF for Your First Attempt and 100% Passing: https://www.passleader.com/ns0-176.html (60 Q&As –> 141 Q&As, VCE and PDF)
More, download new PassLeader NS0-176 Exam Dumps for FREE: https://drive.google.com/drive/folders/1hsTrfw2UhmhEWhIVUsG3flKSQdwc8zpu