New and Valid for 100% Passing Ensure NetApp NS0-155 Dumps from PassLeader: https://www.passleader.com/ns0-155.html (195 Q&As), PassLeader offer both NS0-155 VCE Dumps and NS0-155 PDF Dumps for Preparing for the NetApp NS0-155 Exam, 100% Valid and 100% Passing Guarantee.
More, you can download the latest PassLeader NS0-155 Exam Dumps Online for FREE: https://drive.google.com/open?id=0B-ob6L_QjGLpRmRuU1NXelgwZEk
QUESTION 46
Which three statements are true when using SnapRestore? (Choose three.)
A. The volume must be online.
B. SnapRestore must be licensed before you can use it.
C. The snap restore enable on option must be enabled.
D. The volume to be reverted must not be a SnapMirror destination mirror.
Answer: ABD
QUESTION 47
Which objects can be restored by a single SnapRestore command? (Choose three.)
A. file
B. LUN
C. qtree
D. volume
E. directory
Answer: ABD
Explanation:
SnapRestore on a file and volume:
https://library.netapp.com/ecmdocs/ECMP1196991/html/GUID-1E99ACB2-5C69-4FFC-B115-9D2951D109E9.html
SnapRestore on a LUN:
https://library.netapp.com/ecmdocs/ECMP1196995/html/GUID-577EDC41-FEA0-4987-8F04-55E736962FD1.html
Hint: snaprestore at the volume level or at the file level. LUNs are effectively files.
QUESTION 48
Which option of the snap restore command allows you to specify a different directory, as long as the directory already exists?
A. snap restore -c
B. snap restore -d
C. snap restore -r
D. snap restore s
Answer: C
QUESTION 49
A volume is SnapMirrored hourly. You revert the volume using a snapshot that was created two days ago. Which command continues the relationship?
A. SnapMirror initialize
B. SnapMirror quiesce
C. SnapMirror resume
D. SnapMirror resync
E. SnapMirror update
Answer: D
Explanation:
You can use the snapmirror resync command to reestablish the connection between the source and the destination. This command is applied after the SnapMirror relationship between the source and destination is broken.
https://library.netapp.com/ecmdocs/ECMP1196991/html/GUID-5D846D24-0903-4982-A429-71AE5C0F9033.html
QUESTION 50
When you are setting up SnapMirror, which three are replication pre-requisites? (Choose three.)
A. The source volume must be offline.
B. SnapMirror must be licensed for each storage system.
C. If you are replicating a volume, you must create a restricted volume to be used as the SnapMirror.
D. The capacity of the SnapMirror destination must be greater than or equal to the capacity of the source destination volume.
Answer: BCD
Explanation:
You need to fulfill a set of prerequisites before you can use SnapMirror:
– You must purchase and enable the SnapMirror license. If the SnapMirror source and destination are on different systems, you must enable the SnapMirror license on each system.
– For SnapMirror volume replication, you must create a restricted volume to be used as the destination volume. SnapMirror does not automatically create a volume. For information about how to create volumes, see the section on organizing data using volumes and qtrees in the Data ONTAP Storage Management Guide for 7-Mode.
– For SnapMirror volume replication, the destination system must use a version of Data ONTAP that is the same as or later than that of the SnapMirror source system.
https://library.netapp.com/ecmdocs/ECMP1196991/html/GUID-ED9C09EF-3F61-41FE-B8F1-36356C5FEC5F.html
QUESTION 51
Which command would you use to verify that the iSCSI service is running?
A. iscsi protocol
B. iscsi service
C. iscsi show
D. iscsi status
Answer: D
Explanation:
iscsi status – displays current status of the iSCSI service.
QUESTION 52
Identify the two commands that could be entered on the SnapMirror destination storage system. (Choose two.)
A. snapmirror resync
B. snapmirror release
C. snapmirror initialize
D. options snapmirror.access on
Answer: AC
QUESTION 53
You have quiesced a SnapMirror relationship. Which command would re-establish the scheduled updates?
A. snapmirror restart
B. snapmirror resume
C. snapmirror resync
D. snapmirror update
Answer: B
Explanation:
Snapmirror resume destination. Resumes transfers to destination. The snapmirror resume command can be used either to abort a snapmirror quiesce in progress or undo a previously completed snapmirror quiesce. The command restores the state of the destination from quiescing or quiesced to whatever it was prior to the quiesce operation.
QUESTION 54
Which statement applies to the Open Systems SnapVault Free Space Estimator utility?
A. This utility runs automatically after each transfer.
B. This utility must be enabled on the secondary storage system.
C. This utility determines if there is sufficient disk space available on the primary to perform an OSSV transfer.
D. This utility determines if there is sufficient disk space available on the secondary to perform an OSSV transfer.
Answer: C
QUESTION 55
The snapvault snap sched -x command is used to ____.
A. schedule full backups
B. cancel scheduled backups
C. schedule baseline transfer
D. schedule incremental backups
Answer: D
QUESTION 56
The snapvault snap create volume snapname command can be executed on the ____.
A. open systems
B. primary system only
C. secondary system only
D. secondary or primary systems
Answer: D
QUESTION 57
The SnapVault secondary system allows you to keep a separate schedule of Snapshot copies from your primary system.
A. True
B. False
Answer: A
QUESTION 58
Which three statements apply to NearStore Personality license? (Choose three.)
A. It increases the storage capacity.
B. It converts the destination storage system to a NearStore system.
C. It requires the nearstore_option license on the destination storage system.
D. It provides increased concurrent streams when the storage systems are used as destinations for SnapMirror and SnapVault transfers.
Answer: BCD
QUESTION 59
Which Data ONTAP option sets system-wide throttling for all transfers?
A. options transfer.wide.enable
B. options transfer.throttle.enable
C. options replication.wide.enable
D. options replication.throttle.enable
Answer: D
QUESTION 60
The qtree specified for ____ must not exist on the secondary system before you run the ____ command.
A. pri_qtree_path; snapvault start
B. sec_qtree_path; snapvault start
C. pri_qtree_path; snapvault initialize
D. sec_qtree_path; snapvault initialize
Answer: B
Explanation:
snapvault initialize is not a valid command
http://backdrift.org/man/netapp/man1/na_snapvault.1.html
pri_qtree_path is not a valid command
http://hd.kvsconsulting.us/netappdoc/801docs/html/ontap/onlinebk/GUID-DB31E1F4-60A8-4F34-A1C4-8F79754E4DE2.html
Trying the PassLeader NS0-155 Dumps in VCE and PDF for Your First Attempt and 100% Passing: https://www.passleader.com/ns0-155.html (195 Q&As, VCE and PDF)
More, download new PassLeader NS0-155 Exam Dumps for FREE: https://drive.google.com/open?id=0B-ob6L_QjGLpRmRuU1NXelgwZEk