[14-Aug-2021 Update] NetApp NCIE SAN Specialist ONTAP Exam NS0-520 VCE Dumps and NS0-520 PDF Dumps from PassLeader

New and Valid for 100% Passing Ensure NetApp NCIE SAN Specialist ONTAP NS0-520 Dumps from PassLeader: https://www.passleader.com/ns0-520.html (100 Q&As –> 172 Q&As –> 240 Q&As), PassLeader offer both NS0-520 VCE Dumps and NS0-520 PDF Dumps for Preparing for the NetApp NCIE SAN Specialist ONTAP NS0-520 Exam, 100% Valid and 100% Passing Guarantee.

More, you can download the latest PassLeader NS0-520 Exam Dumps Online for FREE: https://drive.google.com/drive/folders/1iNBGbQ3a8tG27tFp_q6AuzuQqlv3QZoD

NEW QUESTION 1
You have a 4-node cluster with an AFF A300 HA pair and a FAS8200 HA pair. You plan on using the default storage efficiency settings. With inline data compaction, you estimate that you can save 6% of storage space. AFF A300 volumes that use under 5000 IOPS are moved to a FAS8200 using the volume move command. In this scenario, what happens to the data after the volume is moved? (Choose two.)

A.    The new written data is not compacted.
B.    The existing data is compacted.
C.    The new written data is compacted.
D.    The existing data is not compacted.

Answer: A

NEW QUESTION 2
You want to ensure maximum performance of iSCSI LUNs on an AFF A220. In this scenario, which two actions will accomplish this task? (Choose two.)

A.    Disable flow control.
B.    Configure virtual LAN (VLAN).
C.    Enable flow control.
D.    Enable jumbo frames.

Answer: CD

NEW QUESTION 3
Which two features does Assymmetric Namespase Access (ANA) support? (Choose two.)

A.    multipathing
B.    LUN masking
C.    LUN hosting
D.    path management

Answer: AD

NEW QUESTION 4
A customer has an existing 8-node cluster that consists of six FAS2650 nodes and two FAS2554 nodes. The customer wants to expand the cluster by adding two AFF A220 nodes. Which resource would be used to determine whether this configuration is supported?

A.    Interoperability Matrix Tool (IMT)
B.    Config Advisor
C.    OneCollect
D.    Hardware Universe (HWU)

Answer: B

NEW QUESTION 5
As a system administrator, you perform a routine check of available storage space on your FAS2750. You notice that the vol_1 volume is approaching 100% capacity. The volume is configured with the space guarantee set to volume and the LUN reservation is disabled. You want to free up space in the volume without increasing its size. Which action would accomplish this task?

A.    Increase the size of the LUN.
B.    Increase the Snapshot Reserve.
C.    Increase the aggregate size.
D.    Use deduplication.

Answer: C

NEW QUESTION 6
You have three Windows servers and one Linux server, each with dual-ported HBAs that are connected into a dual fabric. In this scenario, what is the minimum number of zones that you need to create within each fabric switch?

A.    8
B.    1
C.    4
D.    2

Answer: A

NEW QUESTION 7
You are planning to expand a SAN-only ONTAP 9.5 cluster that consists of eight AFF A700 nodes. In this scenario, what is the maximum number of additional AFF A700 nodes that would be added?

A.    2
B.    4
C.    8
D.    0

Answer: B

NEW QUESTION 8
You are planning to implement a 32 Gb FC SAN on a 2-node AFF A700 ONTAP 9.5 cluster. You need to create 112 FC LIFs across the HA pair with a limit of 20 FC LIFs per physical HBA port. In this scenario, how many 2-port 32 Gb HBA cards do you need per storage controller?

A.    2
B.    1
C.    4
D.    3

Answer: A

NEW QUESTION 9
Which two are supported in ONTAP 9.5? (Choose two.)

A.    an NVMe LIF and an FC LIF in the same SVM
B.    an NVMe LIF associated with an FC Direct Connect port
C.    a NVMe LIF and an FC LIF associated with the same port
D.    multiple NVMe LIFs in the same SVM

Answer: CD

NEW QUESTION 10
You are configuring both NVMe and FC on the same AFF A800 2-node ONTAP 9.5 cluster. You are configuring both protocols on the same Cisco FC network switches. In this scenario, which configuration on the cluster is supported?

A.    a volume with both LUNs and namespaces
B.    an SVM with both nvme and fcp allowed protocols
C.    an AFF A800 node HBA with both NVMe/FC and FC on the same port
D.    a LIF with both fc-nvme and fcp data protocols

Answer: A

NEW QUESTION 11
On your ONTAP 9.5 cluster, you need to set up the onboard key manager with hardware-based security and volume encryption. Which two licenses are required in this situation? (Choose two.)

A.    FDE
B.    TPM
C.    VE
D.    RSA

Answer: CD

NEW QUESTION 12
You need to configure iSCSI on your existing ONTAP cluster in a new SVM. The iSCSI LUNs will be served over a new Layer 2 network using the same physical ports that also use the CIFS protocol on a different SVM. Which two actions should you perform to accomplish this task? (Choose two.)

A.    Create a new portset.
B.    Create a new VLAN.
C.    Create a new broadcast domain.
D.    Create a new AD object.

Answer: BC

NEW QUESTION 13
You create a 20 GB LUN in a newly created 100 GB FlexVol volume. You then write 5 GB of data to the LUN. You have space reservation disabled on the LUN. In this scenario, how much space do you have left on the volume?

A.    95 GB
B.    80 GB
C.    75 GB
D.    85 GB

Answer: A
Explanation:
https://library.netapp.com/ecmdocs/ECMP1368017/html/GUID-0E0B085C-5A42-43F3-9CCD-4FD699BA6C89.html

NEW QUESTION 14
A customer has multiple host applications that require FC block storage. You need to gather and validate the customer’s requirements for a supported NetApp solution. Which two tools would be used to accomplish this task? (Choose two.)

A.    Interoperability Matrix Tool (IMT)
B.    OneCollect
C.    Config Advisor
D.    Hardware Universe (HWU)

Answer: AD
Explanation:
https://www.netapp.com/us/technology/interop.aspx

NEW QUESTION 15
What is a SAN best practice when initially configuring a Linux FC boot LUN?

A.    Install the Host Utilities in the guest Linux OS.
B.    Map the WWPN of the target.
C.    Disable the HBA port with the host’s BIOS.
D.    Configure multipath to the LUN.

Answer: B
Explanation:
https://library.netapp.com/ecm/ecm_download_file/ECMP1217221

NEW QUESTION 16
How do you configure the iSCSI-SendTargets datastore when the datastore is provisioned from NetApp storage?

A.    You must configure jumbo frames when SendTargets-based iSCSI is used.
B.    Use static discovery to add the target IQN.
C.    Use dynamic discovery to add the target IQN.
D.    You must configure a single protocol on the SVM when SendTargets-based iSCSI is used.

Answer: C
Explanation:
https://www.vmware.com/pdf/vsphere4/r40_u1/vsp_40_u1_iscsi_san_cfg.pdf (page 37)

NEW QUESTION 17
You are planning to set up a new SAN with an AFF A300 2-node switchless cluster. Your SAN fabric will consist of Cisco MDS9148s switches. According to NetApp best practices, which two actions would be required to accomplish this task? (Choose two.)

A.    Set the switchport speed setting to 16 Gb.
B.    Use single initiator, multiple target zoning.
C.    Use multiple initiator, single target zoning.
D.    Set the switchport speed to auto negotiate.

Answer: BD
Explanation:
https://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.dot-mcc-inst-cnfg-fabric%2FGUID-DA51E013-0C96-4D55-9E35-39CDE07082E9.html

NEW QUESTION 18
What is the supported NVMe OS multipathing stack for VMware ESXi?

A.    dm-multipath
B.    MPIO
C.    NMP
D.    PVlinks

Answer: C
Explanation:
https://www.netapp.com/us/media/tr-4684.pdf (page 18)

NEW QUESTION 19
An administrator is adding new hosts to a vSphere cluster. The cluster uses the FC protocol to connect to a NetApp cluster. The administrator wants to configure the multipathing for the ESXi host. Which NetApp tool should be used to accomplish this task?

A.    OnCommand System Manager (OCSM)
B.    Host Utilities
C.    SnapCenter Plug-in
D.    NetApp Virtual Storage Console (VSC)

Answer: D
Explanation:
https://library.netapp.com/ecm/ecm_download_file/ECMP1547465

NEW QUESTION 20
An administrator is asked to configure NVMe on an ONTAP 9.5 cluster for host access. Which three steps must the administrator perform to accomplish this task? (Choose three.)

A.    Create a namespace.
B.    Provision a subsystem.
C.    Configure the FC port.
D.    Gather the IQN from the host initiator software.
E.    Gather the NQN from the host system.

Answer: ABE
Explanation:
https://thinksystem.lenovofiles.com/storage/help/topic/san_administration_guide/M_DDA6B457-8544-43AC-92E8-D846A0BA7671_.pdf (page 26)

NEW QUESTION 21
……


Trying the PassLeader NS0-520 Dumps in VCE and PDF for Your First Attempt and 100% Passing: https://www.passleader.com/ns0-520.html (100 Q&As –> 172 Q&As –> 240 Q&As, VCE and PDF)

More, download new PassLeader NS0-520 Exam Dumps for FREE: https://drive.google.com/drive/folders/1iNBGbQ3a8tG27tFp_q6AuzuQqlv3QZoD